background image

ALSS15  1 09/06/19

Model ALSS15 

 1,500 lb.  Under Hoist Support Stand 

For Technical Questions, Call: 1-800-879-7316

WARNING

WARNING INFORMATION

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

             

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THESE STANDS, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING 
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using these stands. It is also the responsibility of 
the stand owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost  
or not legible, contact Arcan

®

 Professional Tools for replacements. If the operator is not fluent in English, the product and safety  

instructions shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his  
designee, making sure that the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of portable automotive lifting and support devices is subject to certain hazards that cannot be prevented by mechanical means, 
but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the 
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its 
proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly secured loads, overloading, 
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

•  Read, study, understand and follow all instructions before using.
•  User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.
•  This stand is intended to assist in supporting under vehicle components, not the vehicle.
•  Inspect the stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing hardware or 

components. Take corrective action before using the stand.

•  Center load on saddle. Do not use ends of saddle to support load.
•  Adequately support the vehicle before starting repairs.
•  Be sure vehicle, vehicle component and stand are stable before performing any work.
•  Do not use beyond rated capacity. Do not shock load.
•  Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer's 

authorized representative.

•  Use only on a hard level surface capable of supporting the load.
•   Failure to heed these warnings may result in fatal personal injury and/or property damage.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, 
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS 
could cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

WARNING: 

This product can expose you to chemicals including nickel, which is known to the State of California to 

cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING

WARNING

WARNING

Reviews: