5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
Step 3: Align the accent tier’s attachment pins with the bushings on the back panel and gently press down
until they are flush together (Figure C).
Step 4: With accent tier and back panel assembled, set them aside and build canopy next. Align the
attachment pins on the center canopy pieces with the bushings on the canopy elbow piece. Using a
3/16 Allen key, secure together through the top using (4) ¼-20” x .75” decorative screws [D], two
per side (Figure D).
Step 5: Once canopy is built, align the canopy with the wall attachment pin brackets. Using a 3/16 Allen
key, secure together through the top using (4) ¼-20 x .75” decorative screws [C] (Figure E).
Step 6: The plinth on the back panel takes bushings on the bottom to secure in place. Align the bushings on the
bottom of the plinth with the floor mounting bracket and gently apply downward force until the plinth on
the back panel is flat on the floor. With the accent tier and back panel secured in place, align the
canopy’s attachment pins with the bushings on the accent tier and gently push down until canopy is flat
against the accent tier (Figure E).
If you require additional assistance, please contact Arcadia Client Services at 800.585.5957.
accent tier
FIGURE E
FIGURE C
canopy elbow
center canopy
components
FIGURE F
[E] ¼-20 x .75” decorative screws, 4
FIGURE D
