BAG 01
BAG 01
BAG 01
BAG 01
02
01
BAG 01
TH
CA
GE
TH
TH
CA
NOTICE
R803059
R803059
R805052
R802020
R805052
R812040
R801104
R801104
R802019
R801111
R804020
R105203
R105203
R812041
R801020
R801040
R802020
R801020
R801040
R105105
R803040
R822003
R805010
(Included in R828004)
R828004
R804030
R806020
R806020
R805201
R813001
R805201
R105104
R805201
R105105
R105104 3x6 Round Screw (10)
R803040 Servo Saver Post
R804030 Front Belt 201
R805201 4x8mm Flat Screw (10)
R806020 12x18x4 Ball Bearing (4)
R822003 R8.2 Main Chassis
R801104 One Way Plastic Shims
R801111 Pulley Set -Front
R802019 Front One Way
R803059 Front One Way Cup (2)
R804020 O'Ring 10x1.5 (6)
R105105 3x8 Round Screw (10)
R105203 3x6mm Flat Screw (10)
R801020 Downstop Nut Holder (2)
R801040 Bearing Bushing -Solid Axle (2)
R802020 Front Upper Arm Bracket Base
R805052 4x8mm Set Screw (10)
R812040 R8.1 Front Bulkhead-L V2018
R812041 R8.1 Front Bulkhead-R V2018
1:1 Scale
1:1 Scale
=Apply Thread Lock Adhesive
=Apply CA Glue
=Apply Grease
R8.2 CHASSIS WEIGHT ADJUSTMENT
R813001(15g) x2
30g weight increase in front end.
The R8.2 Chassis weight can be adjust by using R828004 R8.2 Chassis weight holder and R813001 R8.1 Slide
Weight -Brass 15g, More weight in front end will increase stability ,The weight adjustment system can add
R813001x1 of 15g or 2pcs of 30g.
Option Parts (Not Included)
Option Parts (Not Included)
R105203
3x6mm Flat Screw (10)
R105104
3x6 Round Screw (10)
R805201
4x8mm Flat Screw (10)
R806020
12x18x4mm Ball Bearing (4)
NOTICE
Initial setup of the front one way axle, please
adjust belt tension after first run.
Loosen
Tighten
R813005
Dowstop Adjust Screw (4)
R805052
4x8mm Set Screw (10)
R105105
3x8 Round Screw (10)
