ARC PBT-707 Manual Download Page 1

Version  2. 

 

 

 

 

 

 
 

pecification: 

 
Function:  

3 sets On / Off / Dimmer 
1 set of Group On/Off 

Frequency: 

433.92MHz 

Battery:   

3V CR2032 lithium cell battery 

 

verview: 

 

Control your lighting with a single touch and take control under your own hands. 
Slim 8 button remote control with 3 sets of ON/OFF button and 1 set of group ON/OFF function. 
 

airing: 

 

Pairing using 

LEARNING MODE

1.

 

First choose the desired receiver(s) that you wish to control. 

2.

 

Press the 

‘Learn’ 

button once (LED will flash), this will now enter learning mode. 

3.

 

On the remote control press the 

‘ON’ 

button intended to be paired; the load will flash twice to 

confirm that the remote control is now paired.   

 

Once pairing is complete, the receiver device(s) will automatically store under the Group 

Wireless Remote Control 

PBT-707 

Summary of Contents for PBT-707

Page 1: ...n and 1 set of group ON OFF function airing Pairing using LEARNING MODE 1 First choose the desired receiver s that you wish to control 2 Press the Learn button once LED will flash this will now enter learning mode 3 On the remote control press the ON button intended to be paired the load will flash twice to confirm that the remote control is now paired Once pairing is complete the receiver device ...

Page 2: ...imply press the Learn button again If during learning mode the load does not flash to confirm this means the receiver s memory is FULL and no further remote control may be paired unless one of the existing remote control is first unpaired see below n pairing Removing single device 1 With the receiver that you intent to un pair press the Learn button once LED will flash this will now enter learning...

Page 3: ...ntrol press the ON button again the loads will start to dim 3 To stop at the desired brightness level press the ON button again Dimming level dims in cycle during the cycle if no signal is given after 4 cycles it will stop at 100 brightness After setting a dim level using the remote control the light is then switched OFF the next time that the light is switched back ON again the load will return t...

Page 4: ...lem The LED on remote control does not light up Solution Please check if the battery is inserted correctly or replace a new battery Problem I cannot pair my remote control with the receiver Solution The memory on receiver is full please delete one or more memory and try pairing again T ...

Reviews: