background image

- 68 -

Appendix

After running the program on command prompt, the utility performs these 

tasks: 

1. 

Provides a specific protection to the BIOS. This ensures the BIOS will 

not become corrupted if power failure occurs while the BIOS update is 

in progress. 

2.  Update the BIOS in master ROM to the new version.

[.]   

 

[..]  89Q1.BAT       BACKUP.EXE      ERROR.LOG

FPARTS.TXT 

FPT11.EXE  

      I89Q1.023 

  UPDATE.EXE

      7 file(s)    18,475,016 bytes
      2 dir(s)      2,590.02 MB free

C:\I89Q1>89q1
C:\I89Q1>update.exe
C:\I89Q1>fpt11.exe - SAVEMAC  -F i89Q1.023

Intel (R) Flash Programming Tool. Version:   11.0.0.1202
Copyright (c) 2007 - 2015, Intel Corporation. All rights reservation

Reading HSFSTS register...Flash Descriptor: Valid

o--- Flash Devices Found ---
oW25Q128BVoID:0xEF4048oSize: 16384KB (131072Kb)

PDR Region does not exists.

 

PDR Region does not exists.

 

- Reading Flash [0x016B000]     - 100 percent complete.

- Programming Flash [0x016B000]   88KB of  88KB - 100 percent complete.

- Erasing Flash Block [0x274000] - 100 percent complete.

- Programming Flash [0x274000]   - 12KB of 12KB - 100 percent complete.

- Erasing Flash Block [0xA0A000] - 100 percent complete.

- Programming Flash [0xA0A000]   - 40KB of 40KB - 100 percent complete.

- Erasing Flash Block [0x0A2000] - 100 percent complete.

- Programming Flash [0x0A2000]   - 4KB of  4KB  - 100 percent complete.

- Erasing Flash Block [0xA51000] - 100 percent complete.

- Programming Flash [0xA51000]   - 4KB of 4KB  - 100 percent complete.

- Erasing Flash Block [0xA59000] - 100 percent complete.

- Programming Flash [0xA59000]   - 8KB of 8KB  - 100 percent complete.

- Erasing Flash Block [0x882000] - 62 percent complete.

3.  Backup the new version of BIOS to the slave ROM. During this stage: 

 

The system will shut down and the screen goes black.

 

The BIOS recovery status LED blinks fast to indicate erasing data 

from the slave ROM. 

Summary of Contents for HiCORE-i89Q1

















































































Reviews: