Arbor Technology Gladius G1052C, User Manual, Page: 87 / 106

- 73 -
Utilities
3.9. Use Barcode Scanner (Configure-to-Order)
If the computer you purchased has a barcode scanner, it can collect barcode data. The
barcode scanner is able to read and decode a number of 1D/2D symbologies. See 3.9.2.
Supported Symbologies on page 75 .
3.9.1. Data Capture
The barcode scanner is ready-to-use without driver. Follow the guide below to capture
barcode data:
1. Assign a function key to trigger scanning. (See 4.1 ARBOR System Suite on page
78 for more details about ARBOR System Suite .)
2. Launch a text editor on the computer. For example Windows’ native Notepad .
3. Find the scanning window on the top of the computer.
scanning
window
4. Point the scanning window at the printed barcode to read while holding the computer
steady a few inches from the barcode.