Arbor Technology FPC-7600 Series, User Manual, Page: 81 / 115

- 69 -
BIOS
5.2.2. S 5 RTC Wake Settings
Access this submenu to configure whether and when to awake the system.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1247. Copyright (c) 2015 American Megatrendes, Inc.
Wake system with Fixed Time
Wake system with Dynamic Time
Enable or disable
System wake on alarm
event. When enabled,
System will wake on
the hr::min::sec
specified
→←: Select Screen
↓↑: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save and Exit
ESC: Exit
Advanced
[Disabled]
[Disabled]
The featured settings are:
Setting Description
Wake System
with Fixed Time
Sets if to awake the system at a defined moment.
Options available are
Enabled
and
Disabled
(default).
Enable this feature to awake the system at a defined
moment in time. When enabled, the following settings
become available:
Setting Description
Wake up hour
Defines the (hour) time to awake the
system.
0 to 23 configurable.
Wake up minute
Defines the (minute) time to awake
the system.
0 to 59 configurable.
Wake up second
Defines the (second) time to awake
the system.
0 to 59 configurable.