Arbor Technology FPC-7200 Series, User Manual

Page: 42 / 89

- 32 -
Installation and Maintenance
3.4 Wall Mounting (Optional)
1. Place the main unit upside down on a flat surface and locate the 8 screw
holes on the bottom cover.
2. Place the wall-mount brackets horizontally along bottom cover edges, so
that the screw holes are aligned with the ones of the bottom cover.
3. Secure the brackets to the main unit with the accompanying screws.
3.5 Grounding the Box PC
Follow the instructions below to ground the box PC onto land. Be sure of
following any grounding requirements in your place.
1. As the figure illustrates above, remove the ground screw located on the
bottom-left of the rear panel.
2. Attach the ground wire to the rear panel with the screw.
Warning
Whenever installing the unit, the ground connection must
always be made first of all and disconnected lastly.