Arbor Technology EasyBoard-882E, User Manual

Page: 58 / 105

- 48 -
BIOS
3.2.4. SATA Configuration
Access this submenu to view SATA device(s) information and also to configure
SATA device(s).
SATA Controller(s) [Enabled]
SATA Mode Selection [IDE]
Serial ATA Port 1 MRSAJ5D016GC12 (16.0G
Software Preserve Supported
Serial ATA Port 2 Empty
Software Preserve Unknown
Serial ATA Port 3 Empty
Software Preserve Unknown
Enable or Disable SATA Device.
Version 2.14.1219. Copyritght (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
: Select Item
: Change Opt. +/-
: Previous Values F2
: General Help F1
: Save & Exit F10
: Exit ESC
: Select Screen
: Select Enter
: Optimized Defaults F9
The featured settings are:
Setting Description
SATA
Controller(s)
Enables/disables SATA device(s).
Enabled is the default.
SATA Mode
Selection
Configures how SATA controller(s) operate.
Options available are IDE (default), AHCI and RAID .
SATA Controller
Speed
Sets the maximum speed for the SATA controller to support.
Options available are: Gen1 , Gen2 and Gen3 (default).
This setting is available only when SATA Mode Selection is set to AHCI
or RAID .
Software
Feature Mask
Configuration
This is a submenu to configure the features of RAID (Redundant Array of
Inexpensive Disks).The featured settings are:
Setting Description Setting Description
RAID0
Enables/disables RAID0.
Enabled is the default.
RAID10
Enables/disables RAID10.
Enabled is the default.
RAID1
Enables/disables RAID1.
Enabled is the default.
RAID5
Enables/disables RAID5.
Enabled is the default.
This submenu is available only when SATA Mode Selection is set to
AHCI or RAID .