Arbor Technology ARTS-4770 User Manual Download

Page: 54 / 103

- 44 -

Installation & Maintenance

4.1. Install Hardware

The computer is constructed based on modular design to make it easy for users to add

hardware or to maintain the computer. The following sections will guide you to the simple

hardware installations for the computer.

4.1.1. Open the Computer

All jumpers, connectors, and PCI Express Mini-card sockets are built on the carrier board.

To access these components, the computer’s top cover has to go. Follow through the

steps below to remove the top cover from the computer.

Place the computer on a flat surface. Loosen and remove the 4 screws from the top

cover as marked in the illustration below.

2. Dismount the top cover.

The inside of the computer comes to view.

To adjust jumpers or connect/disconnect devices to/from the carrier board, see

on page

on page

Summary of Contents for ARTS-4770








































































































Search results

Summary of Contents for ARTS-4770

Reviews:

Related manuals for ARTS-4770

Brands by name

Popular brands

Arbor Technology ARTS-4770, User Manual

Search results

Summary of Contents for ARTS-4770

Reviews:

Related manuals for ARTS-4770

Brands by name

Popular brands