Arbor Technology ARES-1231 Series, User Manual

Page: 90 / 94

- 80 -
BIOS
5.3. Security
The Security menu sets up the password for the system’s administrator account. Once
the administrator password is set up, this BIOS Setup utility is limited to access and will
ask for the password each time any access is attempted.
InsydeH20 Setup Utility Rev. 5.0
Advanced Security Power Boot Exit
Main
Supervisor Password Not Installed
Set Supervisor Password
Change Values F5/F6
Select  SubMenu Enter
Select Item
Select Menu
F1
Exit ESC
Help Setup Defaults F9
Save and Exit F10
Install or Change the
password and the length of
password must be greater
than one character.
The featured setting is:
Setting Description
Set Supervisor
Password
To set up a supervisor password.
1.
After selecting Set Supervisor Password , a dialog box then pops up
on-screen. Enter and confirm your desired password. The length of the
password must be greater than one character.
2. To change an existing supervisor password, you will need to enter the
original password.