Measured Pulse Spacing
Rising Edge
Jitter
~10 ms
Figure 25: Average pulse jitter is the average difference between
the 10 ms reference and measured spacing for all 100 pulses; RMS
jitter is the calculated RMS of the difference between the 10 ms
and measured spacing for all 100 pulses.
Viewing Tools
1.
– Home button: move to the Home screen.
2.
– Zoom in and Zoom out.
3.
– Pause: freeze the display until play is pressed.
4.
– Play: resume viewing the active display after pausing.
5.
– Slider bar: at the bottom of the input screen
allows you to scan through the entire range of 100 bits in the
IRIG-B time code.
6.
– Gear button: at the lower right allows you to more
easily access the input configuration screen and change the
configuration.
7.
– Blue down arrow over line: use to enlarge the upper
text information and lose the lower digital graphics. Touch
again to return to the split display.
29
Summary of Contents for 940A
Page 10: ...x ...
