Arbiter Systems 931A, Operation Manual

Page: 137 / 161

in# Config. in# Config. in# Config.
0 Vab,Vba 8 Vcn, Vcs 27 Vb
1 Vbc, Vcb 9 N/A 26 In
2 Vca, Vac 10 N/A
3 N/A 11 N/A
4 N/A 12 Ia, In
5 N/A 13 Ib
6 Van, Vb, Vas 14 Ic
7 Vbn, Vbs
m#: Magnitude correction 0 to
±
999999
p#: Phase angle correction 0 to
±
359.9
s/r#: 0 to enter scale value; 1 to return scale value.
A.3.44 Store Setup (SST)
Command: #SST
Stores the present instrument setup in Setup Location #.
# = 1 through 6
A.3.45 Setup, Recall (SUP)
Command:
#SUP
Recalls the instrument setup# as stored with Store Setup (SST).
# = 1 through 6
A.3.46 Timer, Arm (TAM)
Command:
TAM
Arms the Timer. For proper operation, the Timer must be armed prior
to a valid trigger condition. If there is a non-zero number on the Timer
display, the TAM command will set it to zero.
A.3.47 Time, Return (TDR)
Command:
TDR
Returns the present time in the format: hh:mm:ss dd mmm yyyy
A.3.48 Time, Set (TDS)
Command:
yyyy:mm:dd:hh:mm:ssTDS
121