February 2020
Page 1.
USER GUIDE
Page 1: ...February 2020 Page 1 USER GUIDE ...
Page 2: ...activate the ARB Intensity Solis driving lights so they will not operate with the high beam circuit press the ARB logo on the touchpad the ARB logo will illuminate from WHITE to RED indicating the system is in standby mode The touchpad intensity level operates by using the up and down buttons as per Figure 2 and will change the intensity of the light output on each press of the up down button The ...
Page 3: ...ing washers and M8x30 Torx drive button head screws Loosely tighten to allow for adjustment later Step 4 Adjustment Point the vehicle toward a flat wall and switch on the driving lights For horizontal adjustment firstly remove the light body and then loosen the three mount bolts Refit the light body Complete the horizontal adjustment and then tighten the centre mount bolt to lock the correct mount...
Page 4: ...se of non genuine ARB components in or with the ARB Product d Use of the ARB Product outside of the requirements of the Product Information 4 The procedure for the customer to claim the warranty is a Return the ARB Product to the nearest ARB Outlet or contact ARB to arrange a time to bring a vehicle fitted with the ARB Product to an ARB Outlet for inspection Contact details are in paragraph 7 belo...
