ARB BASE RACK 1780220, Fitting Instructions

Page: 1 / 2

Last Rev Date: 06/11/2020 Page 1 of 2 Fitting instructions# 3789983
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
Part Number:
1780220 & 1780230
Product Description:
BASE RACK T-Slot adapter (Single & Pair)
WARNING

The ARB BASE RACK system has a maximum capacity of 25kg per cross slat. Exceeding this limit
may result in damage or failure

This product must be installed exactly as per these instructions using only the hardware supplied

Do not use this product for any product, other than those specified by ARB

This product or its fixing must not be modified in any way

These instructions are correct as at the publication date

During installation, it is the duty of the installer to check correct operation/clearances of all
components

Work safely at all times

Unless otherwise instructed, tighten fasteners to specified torque

Fastener torques are to be checked at regular intervals
ARB 4x4 ACCESSORIES
Corporate Head Office
www.arb.com.au
42-44 Garden St Tel: +61 (3) 9761 6622
Kilsyth, Victoria Fax: +61 (3) 9761 6807
AUSTRALIA 3137
Australian enquiries sales@arb.com.au
North & South American enquiries sales@arbusa.com
Other international enquiries exports@arb.com.au
PARTS LISTING
KIT NUMBER APPLICATION. PART NO. QTY DESCRIPTION
1780220
6191060 1 EXTRUSION T-SLOT ADAPTER 100MM
6191075 1 EXTRUSION BASE ADAPTER M6
6151256 2 SCREW BHD M6x16 SS
1780230
6191060 2 EXTRUSION T-SLOT ADAPTER 100MM
6191075 2 EXTRUSION BASE ADAPTER M6
6151256 4 SCREW BHD M6x16 SS