NOX System
User manual
V1.91 - January 2015
36 / 44
Editing user profile
In the menu ”User edit”, select “User profiles”. Here you can choose: New, Edit, Delete and
Copy profile (if a new user profile should be quite similar to an existing user profile).
There are many options here, and most should make sense without further explanation.
On the right hand side are the features a user will have rights to via his user profile.
At the bottom right you can limit the profile setup, by choosing:
If the profile should have access to the system during service mode.
If the profile should be imposed limitations via a time profile or always have access.
If the profile has access to none, all, or special areas, with an associated time profile.
In the middle, you find the permits to the acknowledgement of alarms and deactivation of
detectors.
Note: Authoritazion to ”All” acknowledgements and/or deactivations – gives the
user access to acknowledge alarms or deactivate detectors that otherwise would
be inaccessible.
On the left side, you select which areas the profile is authorized to operate.
Special permits can be defined. For example one can have access to arm, but not disarming.