NOX System
User manual
V1.91 - January 2015
19 / 44
Menu: User
The user menu allows you to modify existing user access codes, to delete and create user
codes. Most of the functions in this menu are restricted to users with complete access rights
– e.g. the owner of the system.
Adding a new user
Create, edit or delete users
Selecting “add” in this menu starts a short dialog of four or five screens (depending on con-
figuration) where the software will ask you to enter a user name, a user-specific language
(only available if using a multi language system), access code and the predefined profile to
assign to the new user:
Username
Enter the name of the user, by using the
keypad. To select the different letters, press
the key multiple times until the requested
character appears. Wait for a little while and
the cursor will move to the next position. If
you enter a wrong character, you can delete
it by pressing the “C” key on the keypad.
User code
Enter the code (normally between 4 and 8
digits).
If there is a problem with the selected code
(e.g. already in use by another person), this
error will be reported immediately.
After the user code is selected, you might
see a similar display called
Card:
If this is the case, present the access card of
the user to a connected card reader.