50
JOB FUNCTIONS
15.4
Tank
Manages tank filling. The management mode will change according to the device set for the tank level reading (
chap
).
From “Home” screen, press
.
Range
Tank level
Fig. 107
Level reset
Filled quantity manual setup
Tank level manual setting
Complete filling
•
Tank level source
:
Level sensor
The computer displays the real quantity of fluid inside the tank, detected by the level sensor.
•
Tank level source
:
Manual
/
Filling flowmeter
The computer calculates the quantity of fluid inside the tank (by processing the job data), and allows to enable several manual procedures:
- Level reset.
- Filled quantity manual setup.
- Tank level manual setting.
- Complete filling, according to the tank capacity.
LEVEL RESET
1
2
Fig. 108
1 - 2
Press to set tank level to zero.
The display will show the tank as empty.
FILLED QUANTITY MANUAL SETUP
1
3
2
Fig. 109
1
Press to set the quantity of liquid filled in the tank.
2 - 3
Set the value and confirm.
The display will show the tank level that has been
reached.
It is not possible to set values higher
than tank total capacity.
CONTINUES
