10
10.3.3 ARAG default functions
The functions described below are illustrative.
The following contents may NOT be updated and may differ from the product in your possession.
To know the default ARAG assignments corresponding to your application, please refer to the relevant manual.
The functions described in this page cannot be changed.
F u n c t i o n s a s s i g n m e n t
Fig. 23
F u n c t i o n s a s s i g n m e n t
Un-
mapped
Fig. 24
F u n c t i o n s a s s i g n m e n t
Fig. 25
F u n c t i o n s a s s i g n m e n t
Fig. 26
"Main" page (P0)
Var. geom. L (A)
Var. geom. L (C)
Height (A)
Height (C)
Boom tilt (A)
Boom tilt (C)
Var. geom. R (A)
Var. geom. R (C)
Seq. 1 LH
Seq. 1 RH
Main valve
switch key
Seq. 2 LH
Seq. 2 RH
PAGE 1a
Arm no. 2 L (A)
Arm no. 2 L (C)
Arm no. 1 L (A)
Arm no. 1 L (C)
Arm no. 1 R (A)
Arm no. 1 R (C)
Arm no. 2 R (A)
Arm no. 2 R (C)
Boom
lock (A)
Boom
lock (C)
Main valve
switch key
Un-
mapped
--
--
PAGE 1b
Drawbar/
Steering axle
AUTO/MAN
switch
Height (A)
Height (C)
Boom tilt (A)
Boom tilt (C)
Boom leveling
AUTO/MAN
switch
Boom
lock (A)
Boom
lock (C)
Main valve
switch key
Implement-
tractor
manual
alignment
PAGE 2
Pr
Pressure -
Un-
mapped
--
--
Nozzle
selection
AUTO/MAN
switch
Spray rate
AUTO/MAN
switch
Seq. 1 LH
Seq. 1 RH
Main valve
switch key
Seq. 2 LH
Seq. 2 RH
Press
keys
to scroll
pages.
O = opens the hydraulic valve
C = closes the hydraulic valve
The following pages contain the mapping of the buttons in
Single
or
Dual
mode.
CONTINUES >>>
