34
14.5
Output menu
This menu contains the description of the functions available during the treatment.
A sub-menu is available for almost all data; to gain access to it press keys
and
at the same time for 1 second.
• Instantaneous speed indication
Speed simul.
Yes
The driving speed simulation allows spraying the product even without a
speed sensor installed on the wheels.
The simulation is set to 6 km/h and can be varied (if set to "Yes") by
keeping key
OK
pressed and pressing keys
and
.
With this function the application rate can not be the real one since
the speed can not be detected.
32.1 GPA
Speed
Fig. 86
• Pressure indication
Reset?
3 psi
Activate the "zero" calibration procedure of pressure sensor.
In case a pressure value is displayed
despite the absence of pressure
inside the circuit
, it is necessary to perform zero setup of the sensor.
- Press
OK
to reset the pressure sensor residual signal.
Check sensor!
Faulty pressure values detected: check the transducer operation. If
problem persists, check for residual pressure in the system.
32.1 GPA
Pressure
Fig. 87
• Instantaneous rate indication
32.1 GPA
Flow
Fig. 88
• Covered area count
32.1 GPA
Area
Fig. 89
• Sprayed fluid count
32.1 GPA
Sprayed qty
Fig. 90
• Tank level*
Tank level
0 gal
It accesses the tank filling function (par. 14.5.1).
32.1 GPA
Tank level
Fig. 91
• Operation time calculation*
32.1 GPA
Time
Fig. 92
• Traveled distance count*
32.1 GPA
Distance
Fig. 93
* this menu item is displayed only if the EXTENDED view mode of the spraying menu is selected (par. 11.18).
USE
Summary of Contents for Bravo 180S Series
Page 41: ...Notes 41...
