15
9.4
Connection of sensors and other available functions
Fix the connectors to the relevant functions according to the initials indicated in your assembly general diagram (par. 7.1).
Harness cables are marked with a symbol denoting their functions: please see the table for correct harness connection.
Use ARAG sensors: use of unsuitable sensors not provided by ARAG automatically voids the warranty.
ARAG is not liable for damage to the equipment, persons or animals caused by failure to observe the above instructions.
ITEM
CONNECTION
F
Flowmeter
M
Pressure sensor
R
Foam marker
S
Speed sensor
X
Level sensor
P
Control valve
G
Main valve
- The products are supplied with the sensor installation instructions.
- Connection of:
• flowmeter;
• pressure sensor;
• level sensor
• foam marker.
All ARAG sensors use the same type of connector. Connect the sensor connector to the relevant harness; make sure it is correctly fitted and push it
until locking it.
Fig. 18
Fig. 19
9.5
Pen drive
The pen drive may be used to exchange data with the BRAVO 180S computer.
Before using it make sure the pen drive is not protected.
All pen drives with up to 8 GB memory are compatible.
INSTALLATION
Summary of Contents for Bravo 180S Series
Page 41: ...Notes 41...
