MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
35
v1.1, Dec 2009
To configure WPA-PSK:
1.
From the
Network Authentication
drop-down menu, select
WPA-PSK
. By default,
Data
Encryption
will be set to
TKIP
.
2.
Enter the preshared key passphrase (Network Key).
3. Wireless Client Security Separation
is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4.
Click
Apply
to save your settings.
Configuring WPA2-PSK
Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2-PSK:
Figure 2-19 Configure WPA2-PSK
