MaxR-3210 Wireless-N Access Point User Manual
Arada Systems Confidential
23
v1.1, Dec 2009
Use the procedures described in the following sections to configure the MaxR-3210. Store this
information in a safe place.
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 2-29
“Configuring WPA2 with RADIUS” on
“Configuring WPA and WPA2 with RADIUS” on page 2-32
for specifics on
implementing these security options).
To set up or modify the RADIUS Server Settings:
1.
From your Web browser, log in to the MaxR-3210 using the default LAN address of
http://192.168.0.237
, user name
admin
and password
password
, or use the LAN address and
password that you set up.
2.
Under the
Configuration
tab, select
Security
on the main menu, select
Advanced
from the
left panel, and then select
RADIUS Server Settings
. The RADIUS Server Settings screen
displays, as shown in
.
Note:
The RADIUS Server Settings apply to all profiles. They only need to be configured
once per Access Point.
