AR 10051217, Operating And Service Manual

Page: 73 / 90

Model 2000S1G2z8
Rev A 49
2.13.25 ALC Board Firmware Query
This command queries the firmware of the ALC board assembly.
Query:
*ALC?
Response Format:
ALC_SW_REV<revision><LF>
<revision>: The revision of the ALC Board.
Example:
To query the ALC Board firmware revision, send the following command:
*ALC?<LF>
Response:
ALC_SW_REV1.60<LF>
(Firmware is v1.60)
2.13.26 SBB (Piggyback) Firmware Query
This command queries the firmware of the piggyback SBB assembly.
Query:
*SBB?
Response Format: SBB_SW_REV<revision><LF>
Where: x is the firmware revision.
<revision>:
The revision of the SBB assembly.
Example:
To query the piggyback SBB firmware revision, send the following command:
*SBB?<LF>
Response:
SBB_SW_REV2.70<LF>
(Firmware is v2.70)
2.13.27 SBB (Optical) Firmware Query
This command queries the firmware revisions (groups of twenty) of the SBB assemblies that are fiber-optically
connected to the MPB assembly. If no fiber-optically connected SBB assemblies are present, an empty list is
returned.
Syntax:
*SBB<group>?
<group>:
The group number (1 or 2) of the SBB assemblies to query.
Response Format:
SBB_SW_REV<revision><LF>
<revision>: A comma-separated list of twenty (20) firmware revisions.
Example:
To query the firmware revisions of the first group, send the following
command:
*SBB1?<LF>
Response:
SBB_SW_REV2.70,2.70,2.70,[…],2.70,2.70<LF>
(Firmware is v2.70)
Response:
(no connected SBBs)
SBB_SW_REV , , ,[…], , <LF>