AR 10046494, Operating And Service Manual, Page: 38 / 60

Model 60/40S1G18B
18 Rev A
2.4.6.12 SBB (Piggyback) Firmware Revision
Query to get the firmware revision of the piggyback SBB assembly.
Syntax: *SBB?
Parameters: None
Query only (always requires a ? character)
Response Format: SBB_SW_REVx<LF>
Where:
x = firmware revision
Example: To get the firmware rev. of the piggyback SBB assembly, send the following command:
*SBB?<LF>
Response: SBB_SW_REV2.60<LF>
2.4.6.13 System Serial Number
Query to get the serial number of the system.
Syntax: SN?
Parameters: None
Query only (always requires a ? character)
Response Format:
x<LF>
Where:
x = serial number (6 to 8 characters)
Example: To get the serial number, send the following command:
SN?<LF>
Response: 1234567<LF>
2.4.6.14 Band Selection
Allows the user to select the band of the amplifier.
Syntax:
BANDy
Parameters: Band(y):
L = low band
H
= high band
Example: To select the low band, send the following command:
BANDL<LF>