AR 10046249, Operating And Service Manual, Page: 51 / 58

Model 150/150AW1000
Rev C 31
4.3.13 Lo Band Low or No Power Output (RF Test) (Schematic
10046147)
NOTE: The DC Tests specified in Section 4.3.10 should be completed before conducting the RF tests specified
in the following sections.
1. The Lo Band (.01-100 MHz) typical gain response at 0 dBm input and -20 dBm input is shown in Figure
4-1. The actual gain may vary considerably from that shown in Figures 4-1 and 4.2 but should be ≥ 51.7
dB at 0dBm input and ≥ 56 dB at –20 dBm input.
Figure 4-1. Typical Response at –20dBm Input
Figure 4-2. Typical Response at 0dBm Input