AR 10046249, Operating And Service Manual, Page: 32 / 58

Model 150/150AW1000
12 Rev C
2.4.6.1 Power On/Off
This command controls the power on/off state of the amplifier.
Syntax:
POWER:x
Parameters: State(x):
OFF = power off
ON = power on
Response Format: None (No query for this command)
Example: To turn the power on, send the following command:
POWER:ON<LF>
To turn the power off, send the following command:
POWER:OFF<LF>
2.4.6.2 RF On/Off
This command controls the RF on/off state of the amplifier.
Syntax: RF:x
Parameters: State(x):
OFF = power off
ON = power on
Response Format: None (No query for this command)
Example: To turn the RF on, send the following command:
RF:ON<LF>
To turn the RF off, send the following command:
RF:OFF<LF>