AR 10044778, Operating And Service Manual, Page: 33 / 54

Model 100U1000
Rev B 15
2.4.6.3 Reset Faults
This will clear all faults, if possible.
Syntax: RESET
Parameters: None
Response Format: None (No query for this command)
Example: To clear any faults, send the following command:
RESET<LF>
2.4.6.4 Level Adjust
This command sets the RF gain of the 4U MPC.
Syntax:
LEVEL:xy
Parameters: Parameter(x):
GAIN = RF Gain
Value(y):
For RF Gain:
0 = Minimum
100
= Maximum
Response Format: None (No query for this command)
Example: To set the RF Gain to minimum, send the following command:
LEVEL:GAIN0<LF>
To set the RF Gain to 50%, send the following command:
LEVEL:GAIN50<LF>