AR 10009284, Operating And Service Manual

Page: 17 / 62

Page 3
40T26G40A

M1–M12

40 Watts CW

26.5GHz–40GHz
E Package Alternatives. May select an alternative
from the following [E1C or (E1C and E2S)
and/or E3H]:
E1C Cabinet: Without outer enclosure for rack
mounting, size (W x H x D) 48.3 x 13.3 (3U) x
68.6 cm, 19.0 x 5.25 (3U) x 27 in, Subtract
approximately 7 kg, 15 lbs, for removal of
outer enclosure.
E2S Slides: slides installed, add approximately 2
kg, 5 lbs.
E3H Handles: Front pull handles installed.
P Primary
Power must select one primary power
from the following options [P1 or P2]:
P1 99-260 VAC, 50/60 Hz, single phase, 850VA
max.
P2 400V Europe 360-435 VAC, 3 phase, WYE (5
wire) 50/60 Hz, 850 VA max. CE marked to
comply with EMC European Directive 89/336/
EEC for operation inside a shielded room.
Model Configurations
S Special Features: May select a special feature
(extra cost) from the following [(S1R or S3F)
and/or S2F and/or S5F and/or S4F]:
S1R Reflected Power Port: Type K female connector
on rear panel. Forward and reflected sample
port calibration data supplied on disk in Excel
format at 51 points, evenly spaced over speci-
fied frequency response.
S2F Flatness: Flatness ± 6 dB max at rated power.
S3F Reflected power port: type K female connector
on front panel. Forward and reflected sample
port calibration data supplied on disk in Excel
format at 51 points, evenly spaced over speci-
fied frequency response.
S4F RF input connector: On front panel, not on
rear panel.
S5F Forward output sample port: On front panel,
not on rear panel.
S6F RF output connector: on front panel.
S7E Ethernet Remote Interface: removes IEEE-488
interface; RJ-45 connector on rear panel.
S8V Video Pulse Capability
To order AR Products, call 215.723.8181. For an applications engineer call:800.933.8181. Direct to Service call: 215.723.0275 or
email: service@arworld.us For Faxing Orders:866.859.0582 (Orders Only Please) info@arworld.us
Approved for public release by AR RF/Microwave Instrumentation 072216
Model Number Features
E P S
40T26G40A Base model P1 –
M1 E1C P1 –
M2 E1C & E2S &
E3H
P1 –
M3 See individual Specification Sheet
M4 E1C P1 S2F
M5 - P1 S1R
M6 E1C P1 S1R
M7 E1C & E2S &
E3H
P1 S1R
M8 E3H P1 S3F, S4F, S5F
M9 E1C & E2S &
E3H
P2 S3F, S5F, S6F
M10 E1C & E2S P1 S1R, S2F
M11 E3H P1 S2F
M12 E1C, E3H P1 S7E, S1R,
S8V
Example: Model number example: Model 40T26G40AM1 would have option
E1C, no outer enclosure.