AR 10009284, Operating And Service Manual

Page: 16 / 62

POWER (fundamental), CW, @ OUTPUT CONNECT-
OR: Nominal, 45 watts; Minimum, 40 watts;
Linear @ 1dB Compression 10 watts minimum
FLATNESS: ± 8 dB
FREQUENCY RESPONSE: 26.5–40 GHz instantane-
ously
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
GAIN (at maximum setting): 46 dB minimum
GAIN ADJUSTMENT (continuous range): 35 dB mini-
mum
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
MISMATCH TOLERANCE: Output power foldback
protection at reflected power exceeding 10 watts. Will
operate without damage or oscillation with any magni-
tude and phase of source and load impedance. May
oscillate with unshielded open due to coupling to in-
put. Should not be tested with connector off.
MODULATION CAPABILITY: Will faithfully reproduce
AM, FM, or pulse modulation appearing on the input
signal. AM peak envelope power limited to specified
power.
VIDEO PULSE CAPABILITY (S8V OPTION)
Pulse Width: 0.1 microseconds min.
Pulse Rate (PRF): 10 kHz max
RF Rise and Fall: 30 ns max. (10% to 90%)
Delay: 300 ns max. (pulse input to 90% RF)
PW Distortion: ± 30 ns max.
NOISE POWER DENSITY: Minus 60 dBm/Hz maxi-
mum); Minus 70 dBm/Hz (typical)
HARMONIC DISTORTION: Minus 20 dBc maximum;
Minus 28 dBc typical
PRIMARY POWER: See Model Configurations
CONNECTORS:
RF input: Type K female, rear panel
RF output Type WR-28 waveguide
flange, rear panel
RF output sample port Type K female, rear panel
GPIB IEEE-488, rear panel
Interlock DB-15 female, rear panel
Video Pulse Input (S8V Option): Type BNC female,
rear panel
COOLING: Forced air (self contained fans), air entry
and exit in rear.
WEIGHT: 30 kg, 65 lbs
SIZE (WxHxD): 50.3 x 16.5 x 68.6 cm, 19.8 x 6.5 x 27
in
EXPORT CLASSIFICATION: EAR99
Page 2
Specifications
40T26G40A

M1–M12

40 Watts CW

26.5GHz–40GHz