☎
Contact Us
For more information about our company or products,
please visit our website at aquascapeinc.com or call
US (866) 877-6637 CAN (866) 766-3426.
facebook.com/AquascapeInc
youtube.com/aquascape4
twitter.com/AquascapeInc
Find us on:
TABLE OF CONTENTS
Introduction …………………………………………… 1
Contents ……………………………………………… 1
Recommended Products …………………………… 1
Safety Information ……………………………………… 1
Specifications Chart ………………………………… 1
Installation …………………………………………… 1-2
General Maintenance ………………………………… 2
Troubleshooting ………………………………………… 2
Warranty Information ………………………………… 2
LED Color-Changing
Fountain Light Kit
Item #84055
FPO
FPO
FPO
I N S T A L L A T I O N I N S T R U C T I O N S
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
LED COLOR-CHANGING
FOUNTAIN LIGHT KIT
No.
Description
1.
LED Color-Changing
Fountain Light
2.
Color-Changing
Remote Control
3.
12-Volt Transformer
Contents - #84055
Aquascape LED Color-Changing Fountain Lights are developed to provide
an impressive accent to fountains. This instruction manual will guide you
through the proper installation of Aquascape color-changing lighting as
well as recommended maintenance procedures to ensure long-term
effectiveness.
Recommended Products
25' Quick-Connect Lighting
Extension Cable
(#98998)
Safety Information
WARNING:
It is
recommended whenever
working in or near water to
have all electrical devices plugged
into a ground fault interrupter (GFCI)
that has been installed by a licensed
electrician.
• To reduce the risk of electrical shock
or damage to the light, all wiring and
junction connections should be made
per local codes. Requirements may vary
depending on usage and location.
• The power cable should be protected
at all times to avoid punctures, cuts,
bruises, and abrasion.
• Operating the light fixture outside of the
10.8-15 volt operating range voids the
product warranty and may damage or
shorten the life of the LEDs.
IMPORTANT:
Aquascape,
Inc. is not responsible for
losses, injury, or death
resulting from a failure to
observe these safety precautions,
misuse or abuse of pumps or
equipment.
5
YE
AR
WARRAN
TY
G
A
R
AN
TIE DE CIN
Q
A
N
S
5
Installation
FOUNTAIN CONNECTION
• Connect fountain tubing/pipe to the barb at the base of the light, using a
twisting motion to secure it in place (Ex. 1).
• Run the tubing down the fountain with the light cable (Ex. 2).
1
2
3
FPO
Ex. 1
Model
LED Color-Changing Fountain Light
Dimensions
1.5" diameter x 2.5"H
Voltage Min-Max/Tensions Min-Max
10.8V-15V
Wattage
2.5±10%
Lumens
20 lm (white)
Kelvin Temperature
3,000 K (white)
Color Rendering Index
70 (white)
Beam Angle Spread
30°
Cord Length
15'
LED Color-Changing Lighting Specs
FPO
Ex. 2
