Aquasafe WSL50 Pro, Instruction Manual

Page: 147 / 193

INDEX:
KEY DESCRIPTION

Power the meter ON/OFF.

Holds the current measured value; press the key
again to resume measuring.

In the calibration or setting mode, returns to
measurement mode.
mode

Toggles between available measurement modes
(pH, mV, ORP, Ion, Conductivity, TDS, Salinity,
Resistivity, DO).

Press and hold to enter temperature setting mode.
cal

Press to enter the calibration mode.

Press and hold to enter the setup menu.
m+ / ▲

Press to store current measured value.

Press in setup mode to scroll up through menu.

Press in temperature setting mode to increase the
setting value.
mR / ▼

Press to view calibration report or stored data.

Press in setup mode to scroll down through menu.

Press in temperature setting mode to decrease
the setting value.
enter

Confirms the calibration, setting value or
displayed option.

Press and hold to turn On/Off the backlight.
2.3 Connectors
The Trace2o® HydroCheck® HC1000 has three connectors for connecting
the various types of sensors.
CONNECTOR FUNCTION
Waterproof S7
Connector pH electrode (or optional ORP or Ion Selective
Electrodes)
Waterproof 6-
pin connector
Dissolved oxygen electrode (or temperature sensor)
Waterproof 3-
pin connector Conductivity electrode