Aquasafe WSL50 Pro, Instruction Manual

Page: 145 / 193

1.1 Introduction
Thank you for selecting the Trace2o® HydroCheck HC1000 portable
multiparameter water quality meter. This manual provides instructions to
guide the user in normal operation, diagnostics and maintenance of the
instrument. Please read the instructions carefully before use.
1.2 Unpacking the Meter
Before unpacking, ensure that the current work environment meet following
conditions.

Relative humidity is less than 80%.

Ambient temperature is greater than 0
o
C and less than 60
o
C.

No potential electromagnetic interference.
The following list describes the standard accessories of the meter. After the
unpacking, please check all accessories are complete. If any are damaged or
missing, please contact nearest distributor.
1.3 List of Accessories

pH Electrode

Conductivity Electrode

Dissolved Oxygen Electrode

pH Buffer Solutions (pH4.01, 7.00)

Conductivity Calibration Solution (1413µS/cm)

Batteries
2.1 Display
The Trace2o® HydroCheck® HC1000 is equipped with a
backlit LCD display that shows measured values, as well
as mode and status indicator graphics.