8
6. DWM-203 run
Step 1. Connection of delivery
pipes
•
Connect the delivery pipes according to the
diagram shown in fig. 9.
To the
drainage collar
Step 2. DWM-203
preoperational phase
•
Remove the film wrapper from the
modules.
From
junction point
Fig. 9
To the tap
with clean
water
•
Remove the slipping plugs from the modules (if any).
•
Rinse the O-rings of the modules under water.
•
To install the module,
insert it into the appropriate
collector until it stops and turn to the right along the arrow,
as shown in fig. 10a, until it clicks.
•
To detach the module,
push the stop button all the way
to the stop and, while holding it, turn the filter module to
the left in the direction of the arrow, as shown in fig. 10b
and remove it.
•
Install modules and utility blind flange, as shown in fig. 11.
•
Insert the plug of electric power supply into a socket, and
the jack plug from the power supply to the DWM-203
connector (fig. 12).
Utility blind flanges
(supplied) (12, fig. 1)
Fig. 10а
Fig. 10b
Fig. 11
Fig. 12
К5
К2