5
5. Installation DWM-203
ATTENTION! It is not recommended to perform work on connection the DWM-203 to the water supply
network independently. For the connection of DWM, it is recommended to contact the service
department of Aquaphor or regional dealers of Aquaphor.
Determine the comfortable location of the tap for clean water and DWM-203. In this case, pay attention to the fact that the
supply tubes pass freely, without fractures and bends (fig. 3). DWM-203 must be removed or insulated from heat sources
(cookers, boilers, hot water pipes, dishwashers or washing machines, etc.).
Tap for clean water
Sink drain
Kitchen
mixer tap
The tube of clean water
1/4” (the color - dark blue)
Drainage
collar
Body DWM-203
Siphon
(«pipe
angle»)
Drainage pipe 1/4” (the
color– black)
Junction point
Cold-water supply
Leading-in tube 1/4”
(the color– red)
Fig. 3