35
8.3
Return of materials
Never send a device/system back if you are not absolutely certain that all traces of hazardous
substances have been removed, e.g. substances which have penetrated crevices or diffused
through plastic.
Costs incurred for waste disposal and injury (burns, etc.) due to inadequate declaration and/or
cleaning will be charged to the delivering company or the operator.
For a device that is sent back to Aquametro Oil & Marine for repair or calibration the following
point are an absolute must:
Always quote type and serial number when contacting an Aquametro Oil & Marine office or a
Aquametro representative.
Always enclose a duly completed "Declaration of decontamination” form (FO0451e).
Only in special cases (e.g. for the reconstruction of causes of errors) and only with the prior
consent of the Aquametro Oil & Marine, equipment must be returned in the unpurified state.
In this case also the contact person at Aquametro Oil & Marine, which has granted the
approval to return a crude device must be stated.
Use form
«FO0451e_ Declaration of Decontamination» and
«FO0301e_Return Form».
8.4
Disposal
At the end of its life cycle, this product should be disposed of according to local
regulations regarding waste recycling or disposal.
Batteries and rechargeable batteries shall be recycled separately.
The separate collection and recycling of used products will help to conserve natural
resources, and ensures that they are disposed of in a way that does not cause damage
to the environment and nature.
Summary of Contents for CONTOIL VZF II
Page 9: ...9...
