14
4.2
Electrical Installation
NOTICE
Electrical connection to the supply voltage and/or connections to other systems.
Risk of malfunction or damage!
Review of technical data, chapter 9, on page 36.
Electrical connection - Display unit options VZF II, VZFA II
Sensor area! (Sensor dome)
No cables, wires or other installation material
must be present in this area. This can lead to
incorrect measurements and damage to the
meter.
Solid state relay
RON ≤100 Ohm, RefOFF ≥10M Ohm
Umax ≤48
VAC/VDC, Imax ≤50
mA
NOTE
Wire size for terminal 1
–
6 is: 0.75...1.5 mm
2
/ 20...16 AWG.
Cable connection
1 / 2 Power supply / output current loop (passive)
3 / 4 Output 1 (passive)
5 / 6 Output 2 (passive)
7 / 8 Reserve
9
Temperature sensor Pt1000
Summary of Contents for CONTOIL VZF II
Page 9: ...9...
