Page - 4
Anchoring to Pad
l
Follow all applicable local, state, and national requirements regarding wind load anchoring.
l
The shipping brackets used to secure the chiller to the pallet are approved mounting (hurricane) brackets. They
should be used to anchor the chiller to the pad.
l
If needed, contact AquaCal
®
to obtain anchoring kit information. Please have the chiller model number and serial
number when requesting support.
See "Identifying Model Specifications" on page 25.
1.2 Clearances
l
Proper air circulation is required for the chiller to operate efficiently. The following diagrams show the minimum
clearances required for the proper operation of the chiller.
l
Avoid storing chemical containers near the chiller. The chemicals can cause equipment damage.
l
Avoid placing objects near or on top of the chiller. This includes shrubbery and lawn furniture. These objects will
reduce performance and efficiency and hinder maintenance access.
(Overhead Clearance)
(Top View)
1.3 Dimensions
(TropiCool
®
TC500)
(TropiCool
®
TC1000)
