Aquacal HeatWave SuperQuiet SQ120R, Operation Manual

Page: 7 / 58

Page - 4
1.3 Display Panel
Display Panel
The following information outlines the operation for a standard installation.
l
Control Buttons will operate differently for custom installations; such as
when a heat pump is connected to an external controller or multiple heat pump
configuration.
l
See " Operating Heat Pump (With an External Controller) " on page 20.
l
See " Operating Multiple Connected Heat Pumps " on page 22.
Buttons
Buttons Description
Slowly slide a finger across the buttons from left to right to disable the sleep mode.
Sleep mode will automatically reactivate after three minutes have passed.
Select either the pool or the spa thermostat.
Enter the user menu for heat pump options.
Used to increase temperature set point and navigate through menu options.
Used to decrease temperature set point and navigate through menu options.
Used to select the heat pump's operating mode. Also used to edit or confirm options in a menu.
Indicator Lights
Indicators Description
Heating Red LED indicates the unit is heating the water.
Cooling Blue LED indicates the unit is cooling the water.
When calling for heating or cooling, up to a three-minute delay may occur
before the compressor starts. The compressor must be operating before
the indicator will illuminate.
1
-
O
pe
ra
tion