AQUABELLA SHOWER AQUAS AQUAMAX FULL PRO FLEX SMART 9.5KW, Instructions Manual And User Manual

Page: 17 / 20

COMMISSIONING THE SHOWER HEATER
3. Before fitting the cover,
turn off the electricity supply.
Remove this square plastic part
in the picture. Fit the front cover.
Turn on the water and electricity again,
and the product should now work normally
2. Turn on the water
and electricity,
before fitting the front cover.
Push the on/off button,
to check water flow and
if there is any leakage
inside the heater or
at any shower connection.
1. Before installation,
rotate the volume control
handle clockwise until
resistance is felt.
Connect the water
and electricity supply.
IMPORTANT NOTE FOR THE INSTALLER
WARNING ....failure to remove that part after commissioning
will result in NO hot water reaching the shower.