Aqua Creek PRO SPA 60, Manual

Page: 8 / 17

8
INSTALL 24V BATTERY & HANDSET
Locate the 24V Battery, the Battery Charging unit and the Handset
Control. Charge the battery for 24 hours (see page 11) then install it
on the bracket above the Control Box. Plug the Handset Control into
the Control Box as shown in the photos to the left. Press firmly to
make sure the plug is fully seated as shown below.
THE LIFT WILL NOT FUNCTION IF THE HANDSET PLUG IS
NOT
FULLY SEATED OR IF THE BATTERY IS NOT
PROPERLY ALIGNED.
NOT SEATED SEATED
LIFT OPERATION:
Before operating the PRO SPA 60
TM
lift for the first time, the user or operator should become
familiar with the Handset Control and its functions. The figure to the left gives a quick
explanation of the four buttons and their function. For example, to move the lift UP, press the
top left button with the ▲ symbol and hold it down until the lift has reached its desired height
and then release the button. The other buttons work in a similar fashion. In all cases, releasing
the button will cause the lift to stop moving.

TO MOVE UP PRESS AND HOLD THE
▲ BUTTON. TO STOP MOVING UP
RELEASE THE BUTTON.

TO MOVE DOWN PRESS AND HOLD
THE ▼ BUTTON. TO STOP MOVING
DOWN RELEASE THE BUTTON.

TO MOVE LEFT PRESS AND HOLD
THE◄►BUTTON. TO STOP MOVING
LEFT RELEASE THE BUTTON.

TO MOVE RIGHT PRESS AND HOLD
THE►◄BUTTON. TO STOP MOVING
RIGHT RELEASE THE BUTTON.