Aqua Creek Products F-MTY600 Manual Download Page 1

Page: 1 / 14

Revised 4/23/19

Mighty 600

Pool Lift

Check entire box and inside all packing materials for parts. Before beginning assembly, read the

instructions and identify parts using the fi gures and parts listed in this document.

It is critical all parts be carefully inspected by the installer prior to installation to ensure no

damage occurred in transit and a damaged part is not used. If any damage occurred in transit,

Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.

Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s

warranty and may affect the safety of the user.

READ CAREFULLY

PART #: F-MTY600

US PATENT PENDING: [16/205,638]

US PATENT NUMBER: [D507,769 S]

600 LB. [272 kg] MAXIMUM WEIGHT CAPACITY

FOR INDOOR OR OUTDOOR USE

MANDATORY

LEAVE THIS MANUAL WITH LIFT OWNER

9889 Garrymore Ln

Missoula, MT 59808

888-687-3552 | +1-406-549-0769

www.aquacreek.com

ADA COMPLIANT

Summary of Contents for F-MTY600















Search results

Summary of Contents for F-MTY600

Reviews:

Related manuals for F-MTY600

Brands by name

Popular brands

Aqua Creek Products F-MTY600, Manual

Search results

Summary of Contents for F-MTY600

Reviews:

Related manuals for F-MTY600

Brands by name

Popular brands