AQUADUCT
2. Safety precautions
The following safetey precautions have to be observed at all times:
1. Read this manual thoroughly and entirely!
2. Save your data before working on your hardware in any case!
3. Be careful in removing existing conventional cooling devices. Es-
pecially when removing cooling devices that are glued on, there is a
risk of damaging the hardware!
4. Depending on the individual design of the cooling system it could
be necessary to pass hoses through the side of the case. In this case
you should use the hose protectors we offer or prevent otherwise that
the hoses will be damaged, especially by sharp-edged drilling holes!
5. Do not start your computer before you are absolutely sure that no
water leaks from the system!
6. Pay attention to the care instructions at the end of this manual.
Specially avoid any contact of the Plexiglas components with
solvents!
7
.
Make sure that your wall socket is protected by an FI-fuse!
8. Maintain a minimum distance of 0.5 m between the aquaduct and
devices that could react in a sensible way to magnetic or electromag-
netic fields!
9. Make sure that the computer can not be operated when the aqua-
duct is switched off. Use a multiple socket with a switch for example,
via which you connect the aquaduct AND the computer to the power
outlet! (230 V versions)
© 2007
Aqua Computer GmbH & Co. KG
- 7 -
Gelliehäuser Str. 1, 37130 Gleichen
