PRODUCT:
QUANTITY:
ITEM #:
Models:
¨
CMC
¨
CMW
¨
CMP
Designed Smart
Built Solid
CheeseMelters
APW Wyott Foodservice Equipment Company
· 729 Third Ave., Dallas, TX 75226
(800) 527-2100 · (214) 421-7366 · Fax (214) 565-0976 · www.apwwyott.com· [email protected]
Rev. 05/06/2008
MODEL CDC-24 SHOWN
Reliability backed by APW Wyott’s
Warranty
• APW Wyott’s Cheese Melters is backed by a 1 year
part’s & labor warranty
• Certified by the following agencies:
See reverse side for product specifications.
¨
CMC-24 208V
¨
CMC-24 240V
¨
CMC-36 208V
¨
CMC-36 240V
¨
CMC-48 208V
¨
CMC-48 240V
¨
Counter Mount (C)
¨
Wall Mount (W)
¨
Pass-Through (P)
Bid Specification
Unit construction is stainless steel with 4” heavy-duty
legs as standard, on Counter Mount and Pass-Through
models. Top, sides and back (except pass-through
model) are fully insulated with high quality insulation.
Special designed control allows unit to maintain standby
level with 25% of heating capacity. Unit has four shelf
height “micro switch” that is activated by placing a plate
on the shelf, which provides ultimate finishing capabili
-
ties. All controls are solid-state with electrical fan-cooled
compartment. Infrared heaters are easy to snap-in and
out. All hardware is stainless steel. All units are single
phase.
APW Wyott Design Feature
Top, sides and back (except on pass-through models)
•
are insulated with 1” of high quality insulation.
When the master switch is ”on,” the unit stays “on” at
•
25% of heating capacity.
Four shelf height “micro switch”.
•
Food placed on rack activates heat to 100% heat “on”.
•
The 24” and 36” models have one unit “on-off” switch
•
and one red unit “on” light.
The 48” model has one unit “on-off” switch and one
•
red unit “on” light. There are also right-half heater “on”
switches and right and left “on” lights. Use half, or the
entire unit as needed.
Solid-state controls.
•
Fan-cooled electrical compartment
•
Instant “on,” instant “off” even heating, top quartz ele
-
•
ments.
