APV Tined Weeder Pro VS 1200 M1, Operating Manual

Page: 30 / 36

30

Important prerequisites are a level seedbed, sufficiently deep seed placement, uniform germination,
loose soil surface, few tracks, and suitable weather conditions.

A missed harrowing pass can NOT be performed at a later date.

Harrowing does not have a lasting effect => several consecutive work passes must be coordinated.

Optimal harrowing takes place at the limit of crop tolerance, in case of doubt, enumerate the crop plant
losses.

When seeding, account for crop plant losses.

The weed controlling effect of the harrow is sometimes already achieved at low forward speeds (above
approx. 1-2 km/h).

Optimal adjustment of the harrow can take a lot of time.
Only the potential of harrowing is described here! Ultimately, harrowing success depends on the skill and
experience of the operator.
16 ACCESSORIES
16.1 WARNING SIGNS AND LIGHTING
For the Tined Weeder Pro, warning signs with lighting are also available as
an accessory. These are required when you want to drive with the Tined
Weeder Pro on public roads.
Order number:

07014-2-501 Standard lighting

07026-2-003: LED lighting
Figure 37
16.2 BRACKET MOUNTING KIT FOR THE PNEUMATIC SEEDER
This bracket is used to mount a pneumatic seeder PS 120 M1
– PS 500 M2
on the Tined Weeder Pro. Please note that it must be mounted in
compliance with the standards.
Order number:
07014-2-503
Figure 38
16.3 DISPERSION PLATE BRACKET
ACCESSORIES KIT
This is used to mount the dispersion plates on the Tined Weeder Pro.
Order number:

07018-2-033: Dispersion plate accessories kit for VS600 (contains 8
dispersion plate brackets)

07019-2-011: Dispersion plate accessories kit for VS750 (contains
16 dispersion plate brackets)

07020-2-035: Dispersion plate accessories kit for VS900 (contains
16 dispersion plate brackets)

07014-2-298: Dispersion plate accessories kit for VS1200 (contains
16 dispersion plate brackets)
Figure 39