APV RH 600 M1, Operating Manual

Page: 21 / 32

21
11 HYDRAULIC SYSTEM DIAGRAM
Figure 19
T: Tractor-side
G: Implement-side
1: Control unit
2: Coupling sleeve BG2
3: Coupling connector BG2
4: Throttle plate
5: Stop tap
6: Cylinder for folding
12 ROAD TRANSPORT
12.1 TRANSPORT ON PUBLIC ROADS (GENERAL INSTRUCTIONS)

Comply with the relevant road traffic regulations in your country.

Do not exceed the axle load and the total weight of the tractor unit.

The mounted implement must be labeled with country-specific warning signs or foils with white-red
slanted bars (in accordance with DIN, ÖNORM or the respective country-specific STANDARDS).

Any part posing a traffic hazard or dangerous parts (tine wheels) must be covered and additionally
identified with warning signs or stickers.

Warning signs or foils should be no higher than 150 cm above the road surface in driving operation.

Do not allow the implement to cover the tractor unit's lighting equipment; if it does the lighting
equipment must be installed on the implement.

Do not allow the implement to impair or reduce the tractor's steerability!

Hitched equipments may only be towed on public roads with an operating permit.

Fold in the hydraulic equipment to transport position.