16
7.6
QUICK-LIFT (FACTORY-MOUNTED)
Use the quick-lift to adapt the implement to the crop without tools;
here only the folded-up arm must be fixed in place with the pin in
the top hole. If the quick-lift is not active, the pin can be stored in
the parking position in the last hole. Likewise, the downward swing
range for the arm can be limited by inserting the pin in the second
hole from the bottom.
The ground clearance is 290 mm when the arm is lifted. By folding
up the arm, a width of approx. 150 mm will not be worked.
Figure 9
1:
Arm
2:
Pin for quick-lift
Fig. 10: Pin in parking position
Fig. 11: Quick-lift
– lifted-out position
Fig. 12: Negative range limitation
The mounted plate (see Figure 13) prevents misuse. Thus the quick-
lift cannot be used as a lifting accessory for the work elements.
Figure 13: Installed plates to prevent misuse
CAUTION!
Before folding the implement, the four arms left and right of the
pivot point must be in working position. Risk of collision with
the arms when they are folded up!
CAUTION!
The quick-lift MUST NOT be used as a lifting accessory!
Summary of Contents for RH 600 M1
Page 30: ...30 NOTES...
Page 31: ...31 NOTES...
