25
Procedure
This is how to perform a calibration test:
Step Description
Explanation
1
Loosen the hexagonal bolt (2) on the calibration
slide (1).
2
Take the calibration slide out of the anchoring and
turn it by 180°.
3
Attach the rotated calibration slide back onto the
seeder.
Result:
4
Hook the calibration bag onto the calibration slide.
5
Select the suitable brush pressure, see
Setting the
brush pressure
on page 29.
6
Switch on the control box.
7
Start the calibration program of the seed drill, refer
to the control box operating manual for more
information.
5.4
SELECTING THE RIGHT SEEDING SHAFT
Purpose
By selecting the right seeding shaft, which is suitable for the seed type, the seeding results are significantly
improved.
Requirements
The following requirement must be fulfilled for this work step:
None
Required components, tools and materials
For this work step, the following components, tools and materials are required:
None
Table of available seeding shafts
From the following tables, select the seeding shaft that is suitable for your purposes:
Summary of Contents for PS 120 M1
Page 39: ...39 9 2 2 PS WITH ISOBUS Electric fan Hydraulic fan...
Page 47: ...47 NOTES...
