background image

smart

RSD-D Quick Installation Guide

Step1. Buckle RSD-D onto the PV module frame.

A.Back buckle

B.Front buckle

Step 2. Connect the INPUT1 connectors of the RSD-D to the first PV module junction box 
and connect the INPUT2 connectors to second PV module, the device DC output voltage 
is within the range of 1.2 ~ 2v.

 NOTE: Do not short-circuit the RSD-D output connectors, otherwise it will be damaged.

2022/05/27  Rev2.8 | Quick Installation Guide

1

Mounting brackets

                                       

OUTPUT-                                                                            

INPUT2-                                           INPUT1-

   

NOTE: Do not place the RSD-D (including DC connectors) where exposed to the sun, rain or snow, even gap 

              between modules. Allow a minimum of 3/4’’(1.5cm.) between the roof and the bottom of the RSD-D to 
              allow proper air flow.

Reviews: