Grille Installation Instruction
Part#
GR18HEC11A
2004-2006 Chrysler Pacifica Main Upper
Page
1
of
2
Rev. 120801
Parts
List
Item
Part Name
QTY Description Item
Part Name
QTY
Description
1
Billet Grille insert
1
23 bars
4
Truss head screw
2
8#X 3/4"
2
L shape bracket
4
/
5
Button Head Screw
4
10-24
×
1
″
3
U-clip
2
8#
6
K-Nut
4
10-24
Install Notes: Overlay
Replacement
Drill
Cut
Step
Description
illustration
1
Identify the grille & hardware with
parts list.
2
Hood up, and remove the OEM
grille from vehicle.
N/A
3
Attach the 4 L shape brackets to
the vehicle. As shown on figure1 &
2.
4
For the upper L shape brackets:
You will need to drill a small pilot hole into the radiator support to attach the
(2) upper L brackets. Center the L bracket, and then drill the hole. Secure the bracket using the #8 truss head
screws & U-clips, as shown on figure 1.
5
The bottom L brackets pick up factory mounting points, as shown on figure 2.
6
Center the billet grille onto the
opening, line up the L brackets
with the grille and then tighten
fasteners.
×
√
√
×
Figure 1
Figure 2
Page
1
of
1
The instruction here is for your reference only. You may need to bend the grille a little bit to
adjust to fit. We strongly recommend the professional installer for best result.
Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during
installation.
We are not responsible for any damage caused by the installation. Thank you for choosing our product!
